Drain Seal is designed as a temporary seal preventing liquid contaminants, rubbish and other debris from entering an exposed drain. Tough tacky polyurethane construction creates a tight seal over the drain grate and is resistant to oil, water and most aggressive chemicals. Its light weight, easy to remove and stores in a convenient Heavy Duty PVC bag. When selecting the correct size, it’s recommended the Drain Seal be 30cm larger than the drain grate. This allows for an approximate 15cm overlap around each side of the opening to create a strong seal. This product is reversible and reusable. Simply wash after use with warm water and a non-aggressive detergent, dry with a cloth, reapply the plastic storage film and store.

Contact us for further information about this product.

Designed for:

• Fuel Stations
• Carparks
• Industrial workshops
• Shopping Centres
• Marina’s

Features:

• Prevents pollutants from entering drains, grates or manholes
• Resists water oil and most aggressive chemicals
• Can be cleaned, stored and reused
• Reversable – Drain Seal is tacky on both sides
• Quick, safe and easy to deploy
• Convenient storage in a HD, PVC Bag
• Range of sizes available

Drain Wardens are a highly effective storm water drain filter. Water runoff from all exposed surfaces, poses a risk of pollutants entering our waterways. Outdoor parked vehicles, machinery, roads and driveways are all potential sources.

Water entering the drain passes through a geotextile filter combined with a highly absorbent hydrophobic polypropylene sock. Whilst silt, trash and debris are captured in the filter, hydrocarbons, oils and fuels are absorbed in the suspended sock. Drain Wardens are a cost-effective solution for decreasing pollution and improving the quality of water leaving a worksite.

Designed for:

• Worksites
• Industrial sites
• Carparks
• Marina’s
• Shopping Centres

Features:

• Removes debris pollutants from stormwater
• Built in overflow feature for extreme rain fall conditions
• Variety of sizes available and custom made to order options
• Safe & easy to install
• Economical
• Australian Made

Drain protection is an essential element in a spill control plan. In the event of a spill, unwanted liquid pollutants must be prevented from entering waterways and into the environment via stormwater drains. The Gel Filled Drain Cover is highly resistant to many liquids and creates a seal by the activation of specially designed polymer powder that activates with water. The expanding powder converts to a gel like mass in the seal pocket easily moulding to uneven surfaces when pressed into place around the drain opening.

The Drain Cover is manufactured from Heavy Duty 900gsm PVC and features 4 x 25mm webbing handles for convenient hanging storage and lifting. An internal sewn foam layer in the base enhances its ability to seal, finished with a 270gsm Geofabric polypropylene underside.

Designed for:

• Preventing liquid contaminants from entering a drain opening
• Uneven or unsealed surfaces around the drain opening
• Storing close to high risk spill area’s close to drains
• Placing over a drain opening whilst a spill is being cleaned up
• Placing over a drain opening when working close by with liquid contaminates
• Industrial sites
• Factories
• Construction sites

Features:

• Heavy Duty 900GSM, UV stable PVC in High Visibility Yellow
• 25mm industrial webbing Handles for carrying and convenient hanging storage
• Standard sizes with custom made to measure options
• Gel seal moulds to uneven surfaces
• Easy to clean with warm soapy water
• Reusable
• Made in Australia

Silt Warden has been designed for industrial and construction work sites. It’s highly effective with preventing drains from becoming congested. This heavy duty drain filter is installed easily and fits securely under the drain grate. Sitting suspended, the filter captures, sand, dirt, sediment, rubbish, worksite debris, leaves and sticks whilst water passes through with ease.

It features bright Yellow Heavy Duty, UV protected PVC. Visible externally around the drain, it can be easily seen by site inspectors and worksite personnel. For convenience, 2 external handles are fitted on 2 sides of the PVC skirt, with another 2 handles included on the basin.   The filter fabric is a 200gsm UV stabilised HDPE knitted construction and can be emptied, washed and reused.

Designed for:

• Broad range of construction sites
• Building
• Road works
• Landscape projects.

Features

• Durable bright Yellow Heavy Duty, UV protected PVC
• Quick, Straight forward installation
• Total of 6 handles designed for easy installation, maintenance and removal
• Filter fabric is hard-wearing, 200gsm, UV stabilised HDPE knitted construction
• Can be emptied, washed and reused. (please dispose contents in accordance with local regulations)
• Australian Made